Webinar Gallery

COMPLETE THIS FORM
TO VIEW THE LATEST FGI WEBINAR

Temporary Landfill Covers - Design & Construction

Strengths and Uncertainties Regarding FPAS Containment by Modern Liner Systems
‍R. Kerry Rowe, Ph.D., P.E Geoengineering Centre and Queen's-RMC, Dept. of Civil Engineering, Queen's University.
‍
Recorded on November 22, 2022
‍
Earn PDH Credit for viewing this webinar!

December 6, 2022

FGI Webinar: Geomembranes in Dams

January 12, 2023

FGI Webinar: Positive Pressure Anaerobic Biogas Cover Systems

February 16, 2023

FGI Webinar: Role of Geosynthetics in Combating the Effects of Global Warming

Mobilized Interface Strengths on Geosynthetic Lined Slopes

Presented By: Timothy D. Stark, Ph.D., P.E.,F.ASCE of the Fabricated Geomembrane Institute

Download Slides Earn PDH Credits

Tuesday, October 18, 2022

Dedicated to advancing the use of fabricated geomembranes through education, research, and technology transfer.WHY?Factory fabrication reduces field welding, reduces installation time and costs, allows modular construction and provides consistent seam and liner quality.

LEARN MORE...

Upcoming Webinars(International Times)

Webinar Archives

Mobilized Interface Strengths on Geosynthetic Lined Slopes

Revised Wind Uplift Design Methodology for Exposed Geomembrane Covers

Microplastics and Geosynthetics

Geosynthetic Reinforced Soil Integrated Bridge System (GRS-IBS) for Transportation Bridge Construction

Live Panel Discussion on Expected Longevity & Applications of Exposed v. Unexposed Geomembranes

Waste Settlement Measurements using Unmanned Aerial Vehicles on MSW Landfills

Geosynthetic Clay Liners in Mining Applications

Heat Generation and Accumulation in MSW Landfills

Design of Leachate Collection Systems Part II

Failure of a Geomembrane Lined Reservoir

Introduction to Design of Mechanically Stabilized Earth (MSE) Walls

Behavior of Textured Geomembrane-Nonwoven Geotextile Interfaces

Panel Discussion on Allowable/Action Leakage Rates

Use of Geomembranes in CCR Landfills and Impoundments

Introduction to Mechanically Stabilized Earth (MSE) Walls

Geosynthetics and Stability for Heap Leaching and Tailings Dams

Industry Best Practices for Floating Cover Systems

Leachate Collection Systems Design & Management I

Panel Discussion on Geosynthetics CQC & CQA

GCLs and Fabricated Geomembranes – Design and Construction

Designing Double Lined Containment Systems Using Flexible Geomembranes

Deep Water Leak Location Survey

Static and Seismic Veneer Stability Calculations

Design Performance of Hazardous Waste and LLRW Landfills Case Study

Geomembrane Attachment and Penetration Design and Installation

Yeager Airport RSS Failure – Forensic Limit Equilibrium and FLAC Analyses

Panel Discussion on Subgrade prep for CQA-CQC for Geomembranes

Geosynthetics in Mining

Geosynthetics for Construction on Soft Foundation Soils

US EPA CCR Regulations

Wrinkles In Containment Applications

Yeagae Airport RSS Failure Case History

Panel Discussion on Constructing with Fabricated Geosynthetics

Testing and Design of Drainage Geocomposites

Post Closure Care of Landfills

Understanding Leak Location Surveys for Owners and Inspectors

Environmental Containment Using Field and Factory Fabricated Geomembranes

Storm Water Management Using Geosynthetics

Floating Cover Systems for Reservoirs and Ponds

Geotechnical Stability of Waste Fills - Lessons Learned & Continuing Challenges

Factory Fabrication, Installation, and Testing of Geomembranes

Dynamic Behaviors of CCRs

Geosynthetics in Challenging Regulatory Environments

Local Practices Managing CCRs

Current and Emerging CCR Regulatory Issues

Accepting Special Wastes and Stability

Temporary Landfill Covers - Design and Construction

CCR Policy & Regulations

Geosynthetics for CCR Applications

Geofoam Applications for Transportation Infrastructure

Multi-Layer Interface Shear Testing

GCL Shear Testing

Geosynthetic Interface Shear Testing

Part 1 of 6: The Service Life of Geomembranes - Presented by R. Kerry Rowe

Part 5 of 6: Application of Fabricated Geomembranes for Coal Combustion Residuals

Part 6 of 6 - Effect of Elevated Temperatures on Geosynthetics

Part 2 of 6: Testing & CQA Procedures - Presented by Glen W. Toepfer of CQA Solutions

Part 4 of 6: The Best Practices For Zero Leak Containment

Part 3 of 6: The Effects of Wrinkles on Geomembranes - Presented by R. Kerry Rowe

GMA Webinar Stability of Geosynthethic Lined Slopes - Part 2

GMA Webinar Stability of Geosynthetic Lined Slopes Part 1

GMA Webinar - Fabrication, Installation, and Testing of Geomembranes

Dedicated to advancing the use of fabricated geomembranes through education, research, and technology transfer.

WHY?
Factory fabrication reduces field welding, reduces installation time and costs, allows modular construction and provides consistent seam and liner quality.

Upcoming Webinars
_{(International Times)}